0 $0.00

Are you sure you would like to remove this item from the shopping cart?

Call us toll free: 888-358-0332

Shop Over 850,000 Tool Parts & 30,000 Schematics

Free Standard Shipping On Orders Over $59.99 w/ Code: TPDFREESHIP (Dealers Ineligible)

Swipe to the left

How to change the spring in Duofast Carpet Staple Gun

How to change the spring in Duofast Carpet Staple Gun
By July 28, 2015 2786 Views

Jul 28, 2015 6:51:46 PM

Hello again! Welcome back to another Do It Yourself article brought to you from all of us here at ToolPartsDirect.com. Today, we’re going to show you how to change the spring in a DuoFast Carpet Staple Gun.

Tools You Will Need:

Torx Screwdriver

Clean Rag

Alright! Let’s get started!

Step 1:

Using your screwdriver, begin to remove the screws from the staple gun and pull off the back cover.

Step 2:

Once the back cover is out, pull out the plunge arm and spring. Now, clean out the inside of the gun with your clean rag.

Step 3:

Once the inside is cleaned, take the spring and insert it into the staple gun. Make sure the bigger part of the spring is at the bottom of the gun.

Step 4:

With the spring installed into the gun, twist the plunge arm until it fits and the spring is able to compress.

Step 5:

Take the back cover and screw it into the back of the staple gun.

Now, test it out and make sure it works! There you go! Hopefully, this article saved you some time and money. Make sure you check out our prior Do It Yourself articles here on the blog and be on the lookout for future content from all the staff here at ToolPartsDirect.com!

Jul 28, 2015 9:22:09 PM

Posted in: Staple Guns